OxaVap ProVap 18-20 Vaporizer has EVOLVED! And EVOLVED Yet Again! We’ve Thrown Away All The Cords! It Now Hosts A Lithium Battery! AND Is Ready For Pro/Sideliner Action As It’ll Oxalic Acid Vaporize Up to 40 Hives On A Single Battery!
As with the Varrox Eddy but with a ProVap 110 volt Heavy Duty twist, no more toting of power generators or using inverters with heavy car batteries! All the advantages of the corded ProVap110 & battery powered Varrox Eddy are now combined into one great, new CORDLESS vaporizer! It’s powered by either 18-20v Milwaukee, DeWalt, Makita or Bosch Lithium-Ion batteries that are capable of vaporizing over 40 hives without a recharge!!!! No more tangled wires, no more tripping over wires! It’s all hand held in one device!
It comes with a NEW ProVap dispenser, which is an integral part of the vaporize. You now can adjust the amount of Oxalic Acid you’re vaporizing into the hive from 1-4 grams with a simple twist of the dial! With the included dispenser, there’s no flipping of the vaporizer to get the OA into the heating vessel!!! There’s also no measuring of the OA. You just set the dispenser dial to the number of grams you desire. Dip the dispenser into the OA (where it will “grab” the OA) then place the dispenser into the PV18 “chimney.” Hold and push down on the dispenser tube until you feel it “lock it into place” and “tap” the dispenser top to disburse the OA into the heating chamber. Easily adjust for each hive dosage by merely twisting the dial! Since there is no “flipping” of the vaporizer, hives on pallets are now a breeze. Note: if your Oxalic Acid is bone dry, mist it slightly with water to allow it to “catch” in the vaporizer.
We’ve also changed the ProVap vaporizer stem to brass and made it to screw into the heating bowl. Since it now screws, in the event of damage, simply unscrew the old and replace with new! How much easier can it get? We have also added “teeth” to the heating chamber to keep the vaporizer from possibly spinning when inserted!
That’s it!!! Still just 20 or so seconds per hive when vaporizing 2 grams. Additional grams will require a slightly longer time.
Once the ProVap 18-20 heats up (about 1.5 minutes), it’s ready to go for the entire yard. It just doesn’t get any easier unless you’re having someone doing it for you! Now your choice on which vaporizer you wish to use are all in one place,
OxaVap ProVap 18-20 Vaporizer Features:
- 250 watts
- 13.8 amps
- 18 Volt to 20 Volt batteries supported
- ProVap supports Dewalt, Makita, Milwaukee and Bosch battery styles
- Weighs less than 3lbs (without battery – battery not included)
- Does not include any Oxalic Acid or ApiBioxal chemicals (order OA chemical separately)
Review more information on how to use the OxaVap ProVap 18-20 Vaporizer here ->